Universal Shifter Kit for Dodge Challenger/Charger 2015 and up - Automatic

Universal Shifter kit for Challenger and Charger 2015 and up with Automatic transmission

White Madness Garage universal shifter designed for Dodge Challenger and Charger designed and built in USA with quality materials and gives you an ability to switch shift knob for any available shift knob on the market with M12x1.25 thread size.

Universal Dodge shifter is a direct replacement with your OEM shifter which gives you more Old-School look and feel. The whole installation will take you about 10 minutes with minimal mechanical knowledge and skills.

Shifter assembly made from aluminum and can be in three different colors: Polished aluminum, Gloss black, Satin black.

Universal Shifter comes with no shift knob so make sure you got one from us to complite the kit.

What is included:

• (1) ONE shifter kit
• (2) TWO Zip Ties
• (1) ONE Plastic piece

What you need to BUY separate:

• Shift Knob with thread size M12x1.25

 

You can check our "The Ball" shift knob which can complete the Kit

Video Installation instruction is coming soon.

Check our Instagram page for updates. Thank you!

Installation Instruction:

• First you need to remove the bazel around your OEM shifter. Try to use plastic pray tool.
• Once you remove the bezel locate the bolt and remove it and pool the OEM shifter up from the shaft.
• Next step is to remove the leather boot around the shifter. On both side you will see taps which has to be pried out which helps you to pull the leather out of OEM shifter.
• Once it's done disconnect the shifter and pull out of the leather boot.
• Put the OEM shifter into the plastic bag and find the way to hide it in the console (Challenger - in front of the Shifter assembly, Charger - on the back)
• Now you need to remove the OEM plastic piece from leathe boot. It's glued so just gently take it apart.
• Now, take black plastic piece provided with the kit and put it on the metal shaft.
• Take your NEW Shifter and fish it through the leather boot and zip tie the boot to the shifter.
• Next pull everything on the metal shaft of the shifter assembly and match the holes on  both shafts.
• Pull the plastic piece up onto the shaft and match the hole to the rest.
• Take the BOLT from your OEM shifter and tighten in down.
• Reassemble everything back and enjoy your new Shifter!